ADLER Legno Dura-Öl Matt Universal Oil for Furniture and Interior Finishing

Preserve Wood’s Natural Beauty with Unrivaled Protection

• Natural Aesthetics: Retains the natural look and feel of wood with minimal film formation, enhancing its inherent beauty.
• Superior Durability: Provides outstanding resistance to water and chemicals, ensuring long-lasting protection for heavily used surfaces.
• Universal Application: Suitable for both hard and softwoods, offering versatile use for furniture, interior finishing, and even floors when hardened.
• Quick & Efficient: Fast-drying with excellent penetration capacity and flow properties, ensuring efficient application and a smooth, even finish.

Discover Legno Dura-Öl, the ultimate matt, universal oil for protecting and enhancing your wooden furniture and interior surfaces. This exceptional oil allows the inherent beauty of your wood to shine through, creating a natural look and feel with minimal film formation. It’s not just about aesthetics; Legno Dura-Öl delivers robust protection against daily wear and tear.

Whether you’re finishing new furniture or revitalizing existing interiors, Legno Dura-Öl offers unparalleled performance. Its fast-drying formula ensures efficient application, allowing you to enjoy your refreshed spaces sooner. The oil’s remarkable penetration capacity and excellent flow properties guarantee a smooth, even finish every time, subtly accentuating the wood grain without overpowering its natural character.

Experience peace of mind with surfaces treated with Legno Dura-Öl. It provides outstanding resistance to water and chemicals, making it ideal for areas subject to normal or even heavy wear, such as living room fittings, bedroom furniture, and even stairs and wooden floors when used with a hardener. Beyond its protective qualities, Legno Dura-Öl is antistatic, contributing to a cleaner, more pleasant environment. Embrace a finish that is both beautiful and resilient, maintaining its quality and charm for years to come.

Product information

• Finish: Matt
• Drying Method: Oxidative (air-drying)
• Key Ingredients: Modified vegetable oils, waxes, silicic acid, mild-odour solvents, lead-free and cobalt-free drying agents
• Application Versatility: Suitable for hard and softwoods; single-component for furniture/interior, two-component (with hardener) for stairs/wooden floors
• Antistatic Properties: Yes
• Estimated Yield: Approx. 20 m²/l (actual consumption may vary)
• Follow-up Treatment Time: 5 hours (at 23 °C, 50% RH)
• Thorough Drying Time: 7 days (at 23 °C, 50% RH)
• Pot Life (with hardener): 3 hours
• Recommended Wood Moisture: Hardwoods: 12 ± 2%; Softwoods: 15 ± 2%
• Minimum Processing Temperature: +10 °C (product, object, and room)
• Storage Life: Minimum 1 year in original sealed containers (protected from moisture, direct sunlight, frost, >30°C)
• Giscode: Ö60
• Certifications:
  • DIN 53160-1 and DIN 53160-2: Perspiration and saliva-proof
  • ÖNORM EN 71-3: Safety of toys (free of heavy metals)
  • French Ordinance DEVL1104875A: A+ rating for low volatile pollutant emissions

Usage

Ensure the product, object, and room temperatures are at least +10 °C for optimal results (ideally 20-25 °C with 40-60% relative humidity). Stir the product well before use. The product is ready to use, but can be combined with Legno Hardener (7084000210) for enhanced durability on floors and stairs.

Substrate Preparation:

• Ensure the wood is dry, clean, able to hold paint, and free of separating substances such as grease, wax, silicone, or resin.
• Sand the wood uniformly in stages up to grit size 180.
• Remove all sanding dust thoroughly.

Application Steps:

1. Basic Treatment: Apply 1 thin coat of Legno Dura-Öl (7035) using a cup gun, brush, or roller. For inner surfaces of furniture/cabinets, apply only one thin coat due to possible odours.
2. Intermediate Sanding: After 5 hours (follow-up treatment time), lightly smooth sand with grit size 220-280.
3. Remove Sanding Dust: Clean the surface thoroughly.
4. Final Treatment: Apply 1 final thin coat of Legno Dura-Öl (7035).

Two-Component Application (for floors/stairs):

• Mix 10 parts Legno Dura-Öl (7035) with 1 part Legno Hardener (7084000210). Stir the hardener carefully into the product before processing.
• Pot life is 3 hours once mixed. Increased temperatures reduce pot life.
• Ensure the primer does not dry for more than 24 hours before applying the finishing coat.

Important Notes:

• For hardwoods and tropical woods rich in active substances, always perform a test treatment with Legno Dura-Öl (7035) first.
• Provide good room ventilation to ensure proper drying. Low ventilation can delay drying.
• Clean working equipment immediately after use with Legno-Reiniger (7003) or Adlerol-Terpentinölersatz (7231).

Frequently asked questions

• Is Legno Dura-Öl suitable for all wood types? Yes, it is suitable for both fine-pored and coarse-pored hardwoods and softwoods. For extract-rich woods, a test treatment is recommended.
• Can this oil be used on wooden floors and stairs? Yes, for floors and stairs, Legno Dura-Öl must be used as a two-component product, mixed with Legno Hardener (7084000210).
• How long does Legno Dura-Öl take to dry completely? It is thoroughly dry after 7 days, though follow-up treatment is possible after 5 hours (at 23 °C and 50% relative humidity). Drying times can vary based on conditions.
• What are the safety precautions when using this product? The product is for industrial and professional use. Avoid inhaling aerosols during spray application using a respirator. Cloths soaked with oxidative drying products pose a spontaneous combustion risk; spread them out to dry or store in sealed metal containers/under water.
• What certifications does Legno Dura-Öl have? It is certified perspiration- and saliva-proof (DIN 53160), free of heavy metals (ÖNORM EN 71-3), and has an A+ rating for low volatile organic compound emissions (French ordinance DEVL1104875A).

This product is intended for industrial and professional use only. Always consult the safety data sheet for comprehensive information on transport, storage, handling, and disposal. Be aware of the risk of spontaneous combustion when using cloths soaked with oxidative drying products; ensure they are spread out to dry or stored in sealed metal containers or underwater. Always test the product on a sample area to confirm suitability for your specific application and processing conditions.