Adler Legno Smart-Öl Base W30 Eco-Friendly 2C Hard Wax Oil for Wood Surfaces

Experience Unmatched Protection and Natural Beauty with Adler Legno Smart-Öl Base W30

• Efficient Single Application: Formulated with over 97% solids, this hard wax oil typically requires only one coat, significantly reducing application time and ensuring comprehensive coverage.
• Superior Resistance: Provides outstanding mechanical and chemical resistance, along with excellent water repellency, protecting surfaces from daily wear, spills, and common household chemicals.
• Certified Eco-Friendly & Safe: An ADLER green product, it meets strict environmental and health standards, including being free of heavy metals (EN 71-3) and saliva- and perspiration-proof (DIN 53160), ensuring safety for all occupants.
• Natural Finish & Pleasant Feel: Penetrates deeply to enhance wood’s natural grain and color, leaving a smooth, antistatic surface with a remarkably pleasant tactile sensation.

Elevate your interior spaces with Adler Legno Smart-Öl Base W30, the ultimate choice for preserving and enhancing the natural beauty of wood. This advanced 2-component hard wax oil is engineered for both professional and industrial applications, delivering unparalleled protection and a truly pleasant tactile experience.

As an ADLER green certified product, Legno Smart-Öl Base W30 stands for sustainability and safety. It’s rigorously tested and proven to be free of heavy metals, making it safe for use in children’s toys (EN 71-3), and resistant to perspiration and saliva (DIN 53160). Breathe easy knowing your treated surfaces contribute to a healthier indoor environment, reflected by its A+ rating for volatile pollutant emissions.

Designed for efficiency, its high solids content typically allows for a single, comprehensive application, saving you time and resources. Enjoy peace of mind with surfaces that boast outstanding mechanical and chemical resistance, coupled with exceptional water repellency. From busy wooden floors to cherished furniture, interior doors, and staircases, your wood will be shielded against daily wear, spills, and general deterioration, maintaining its pristine look for years to come.

Beyond protection, Legno Smart-Öl Base W30 deeply nourishes the wood, highlighting its inherent grain and warmth. It leaves an antistatic, smooth finish that invites the touch, transforming your living spaces into havens of natural elegance and comfort. Choose Adler Legno Smart-Öl Base W30 for a solution that combines expert-level performance with responsible ecological care.

Product information

• Product Type: Eco-friendly, universal 2-component (2C) hard wax oil with >97% solids content.
• Composition: Natural vegetable oils (linseed, wood), hard waxes, matting agents, lead-free/cobalt-free drying agents, oxime-free anti-skinning agents.
• Application Area: Suitable for surface treatment of furniture, interior finishing, wooden floors, interior doors, and staircases subjected to normal or heavy wear.
• Drying Mechanism: Oxidative drying (oxygen absorption from atmosphere).
• Hardener Requirement: Must be used with Legno Hardener (7084000210).
• Mixing Ratio (by weight): 3 parts Legno Smart-Öl (7045): 1 part Legno Hardener (7084000210).
• Pot Life: 3 hours (reduced by higher temperatures).
• Application Methods: Cup gun, Brushing, Rolling, Wiping.
• Applied Quantity: 30-50 ml/m² per application.
• Yield: 15-30 m²/l per application (actual consumption varies).
• Drying Times (at 23 °C / 50 % rel. humidity):
  • Ready for follow-up treatment: 12 hours
  • Thoroughly dried: 7 days
• Suitable Substrates: Fine-pored and coarse-pored hardwoods and softwoods.
• Wood Moisture Content: Hardwoods: 12 ± 2%; Softwoods: 15 ± 2%.
• Certifications & Standards:
  • ÖNORM A 1605-12 (furniture surfaces): Resistance to chemical reactions: 1-B.
  • DIN 53160-1 and DIN 53160-2: Perspiration and saliva-proof.
  • ÖNORM EN 71-3: Safety of toys; free of heavy metals.
  • French Ordinance DEVL1104875A: Volatile pollutant emissions: A+.
• Available Sizes (Base W30): 0.875 l, 2.4 l.
• Available Colour Shades: Basis W30 (7045000030), Farblos (7045000200), Hebe, Fortuna, Kronos, Selene, Uranus, Moros, Thor, Athene, Herakles, Eros, Pan, Artemis, Hades. (Final colour depends on wood and application quantity).

Usage

Preparation: Ensure the product, object, and room temperature are at least +10 °C (optimally 20-25 °C with 40-60% humidity). The substrate must be dry, clean, free of dust, grease, wax, silicone, and resin. For furniture and interior doors, sand with grit size 150-240; for wooden and parquet floors, use grit size 100-180. Always remove sanding dust thoroughly. For superior results, especially on solid woods, moisten the sanded wood, allow it to dry, then re-sand with the last grit size used. Always perform a test treatment on hardwoods and tropical woods rich in active substances before full application.

Mixing & Application: Stir the Legno Smart-Öl (7045) thoroughly before use. Carefully mix 3 parts Legno Smart-Öl with 1 part Legno Hardener (7084000210) by weight, ensuring the hardener is fully incorporated. The pot life of the mixture is 3 hours. Apply the product using a cup gun, brush, roller, or by wiping. Allow a short time for the oil to penetrate, then carefully wipe off any excess with a cotton cloth or gauze in the direction of the wood grain. For larger surfaces and an enhanced finish, consider light sanding with a random orbital sander or single-disc machine using fine-grit pads, followed by polishing and a final wipe with a lint-free cloth. To prevent shiny pores in deep-pored woods, rework the surface with a non-scratching brush (e.g., a horsehair brush) after removing excess, then wipe across the entire surface along the grain. Avoid film formation at all costs. Apply a maximum of one thin coat to the inner surfaces of furniture/cabinets to prevent possible odors.

Drying & Curing: Ensure good room ventilation during drying. Lower temperatures, high humidity, or dense stacking will significantly extend drying times. While follow-up treatments can be performed after 12 hours, the surface reaches full hardness and thorough drying after 7 days.

Cleaning & Maintenance: Cleaning of treated surfaces should only be carried out at the earliest 14 days after application. Use water, a mild household cleaner, or specific Adler cleaners like Clean-Möbelreiniger (7202) or Clean-Parkettreiniger (7207). For greasy stains, use Legno Reiniger (7003). For wooden floors, Legno Holzbodenseife (7031) is also suitable. Do not use abrasive cleaning agents. For refreshing and after-care, apply Legno Pflegeöl (7009) and wipe away any excess.

Frequently asked questions

• Is Adler Legno Smart-Öl Base W30 safe for items that children might interact with? Yes, it is certified to ÖNORM EN 71-3, ensuring it is free of heavy metals and safe for use as a toy. It is also perspiration and saliva-proof according to DIN 53160.
• Can this oil be used without the hardener? While it may be possible for surfaces with minimal wear, using it as a single-component product significantly increases drying time and reduces durability. For optimal performance, always use it as a 2-component system with the specified hardener.
• What is the recommended drying time before the surface can be used? The surface is ready for follow-up treatment after 12 hours. However, it requires 7 days to dry thoroughly and fully cure for optimal hardness and resistance.
• What is the working time once the product is mixed with the hardener? The pot life of the mixture is approximately 3 hours. Higher ambient temperatures will reduce this working time.
• How should I clean and maintain surfaces treated with Legno Smart-Öl? Clean treated surfaces no earlier than 14 days after application with water, a mild household cleaner, or specific Adler cleaners such as Clean-Möbelreiniger. For refreshing and after-care, apply Legno Pflegeöl (7009). Avoid abrasive cleaning agents.

Important Safety Information: Always ensure adequate ventilation and wear appropriate personal protective equipment (e.g., respirator with A2/P2 filter for spraying, P2/P3 dust filter for sanding). Cloths soaked with oxidative drying products pose a risk of spontaneous combustion; spread them out to dry or store in sealed metal containers/under water. Do not use in spray booths contaminated with nitrocellulose-containing dust. Refer to the product’s safety data sheet for comprehensive guidelines on safety, handling, storage, and disposal.