Vivacolor LF Fine Putty for Walls and Ceilings – Easy to apply and sand, Interior, White

Vivacolor LF Wall and Ceiling Putty, Fine Interior Putty, White, Easy Sanding, Plasterboard, Concrete, Fast Drying

Achieve a professional finish with Vivacolor LF, a high-quality, fine acrylic putty designed for perfect alignment of walls and ceilings in dry interiors. It is easy to apply and perfectly smooth, creating a flat and smooth surface that is ideal for painting or wallpapering.

Vivacolor LF is a versatile solution for finishing a wide range of surfaces. It is suitable for plaster, concrete, brick, plasterboard and primed fibreboard surfaces. Use it to fill small cracks, bolt holes and joint seams as well as to smooth larger areas for a perfectly smooth finish.

Key features and benefits:

• CREATES A PERFECTLY SMOOTH SURFACE: Thanks to its fine texture (maximum particle size 0.08 mm), the putty produces an extremely smooth and even surface that is the perfect basis for any subsequent finishing.
• EASY TO APPLY AND SMOOTH: The plastic consistency of the putty ensures easy application and levelling, while once dry it is easy to sand, reducing effort and saving time.
• GOOD ADHESION: The acrylic copolymer binder guarantees a strong adhesion to all common mineral substrates, ensuring long-lasting and high-quality results.
• FAST DRYING FORMULA: The putty dries quickly (1 mm layer – 3 hours), allowing you to finish the project faster and move on to the next stage of the job – sanding and painting.
• UNIVERSAL APPLICATION: Ideal for both complete wall and ceiling levelling and localised repairs – filling cracks, screw holes and plasterboard joints.

Instructions for use:

1. Surface preparation : The surface must be clean, dry and degreased. Primed previously unpainted, loose and dusty surfaces with a suitable primer. Glossy surfaces should be sanded matt.
2. Application: Apply the trowel, spreading it thinly (up to 3 mm). Incorporate fibreglass or paper tape in the joints of the plasterboard before trowelling.
3. Drying and sanding: After drying (approx. 3 hours for a 1 mm layer), sand the surface with fine sandpaper and thoroughly remove sanding dust. It is recommended to use eye protection and a dust mask when sanding.
4. Re-application: If necessary, apply a second coat after the first coat has dried completely.

Technical data:

• Acrylic copolymer.
• Application: Dry interior walls and ceilings
• Tint: White
• Maximum layer thickness: 3 mm
• Consumption: ~1 l/m² (1 mm thick layer); ~0.2 l/m² (2x joint filling)
• Density: approx. 1.4 kg/l
• Packaging: 0.6 l, 3 l, 10 l, 15 l