ZINGA ALUSPRAY Aluminium Flake Aerosol Coating 500 mL

Achieve a Flawless Aluminium Finish with ZINGA ALUSPRAY

• Superior Protection: Offers excellent resistance to mechanical shocks, abrasion, and erosion, extending surface life.
• Economical Solution: A highly cost-effective choice for achieving a professional, long-lasting aluminium finish.
• Aesthetic Appeal: Delivers a beautiful aluminium look (comparable to RAL 9006 hot-dip), enhancing the visual integrity of metal surfaces.
• Versatile Application: Ideal for touch-ups on hot-dip galvanization, metallization, or as a topcoat over ZINGA for maximum flexibility.

ZINGA ALUSPRAY is your ultimate solution for restoring and protecting metal surfaces with a stunning aluminium finish. This high-performance aerosol coating is engineered with fine aluminium flakes, providing both exceptional aesthetics and robust defense against environmental elements.

Whether you’re touch-up galvanized layers, refreshing metallized surfaces, or adding a final protective and decorative layer over a ZINGA system, ALUSPRAY delivers unparalleled results. Its ease of application ensures a smooth, even coating, making it accessible for professionals and DIY enthusiasts alike.

Experience the benefits of a coating that not only looks good but also stands up to the rigors of daily use. ALUSPRAY offers remarkable resistance to mechanical shocks, abrasion, and erosion, ensuring your surfaces remain pristine and protected for longer. Choose ZINGA ALUSPRAY for an efficient, durable, and economically smart way to achieve a perfect aluminium look.

Product information

• Components: Aluminium powder, Aromatic hydrocarbons, Binder
• Density (at 20°C): 0.656 Kg/dm³ (± 0.05 Kg/dm³)
• Propellant: Dimethyl ether
• Flashpoint: -41°C
• VOC: 619 g/L
• Dry Film Colour: Aluminium (comparable to RAL 9006 hot-dip)
• Temperature Resistance (dry film): -40°C to +150°C
• Packaging: 500 mL Spray can
• Shelf Life: 5 years (in original, unopened packing; shake mechanically after 3 years)
• Storage: Store vertically in a dry place between 5°C and 35°C (preferably 18°C)
• Theoretical Coverage (40 μm DFT): 4.0 m²/L
• Drying Time (40 μm DFT at 20°C, well-ventilated):
  • Dust dry: 15-30 minutes
  • Touch dry: 30-45 minutes
  • Dry to handle: 1.5 hours
  • Fully cured: 24 hours

Usage

Surface Preparation: Ensure surfaces are clean, dry, and free from grease or contaminants. Degrease thoroughly, preferably by steam-cleaning or using a suitable solvent like ZINGASOLV (never white spirit). For optimal performance, prepare ferrous metals and zinc surfaces to SA 2.5 (ISO 8501:2007) or St 3 for non-critical areas. Achieve a roughness of Rz 50 to 100 µm where required, or ensure existing galvanized/metallized surfaces are suitable. Apply ALUSPRAY as soon as possible after preparation.

Application Conditions: Apply in ambient temperatures between 5°C and 40°C, with relative humidity not exceeding 90%. Surface temperature must be at least 3°C above the dew point and not exceed 60°C. Avoid applying to damp or wet surfaces.

Application Instructions: Shake the can vigorously for at least 30 seconds after the mixing balls are free. Repeat shaking if there’s a pause in application. Hold the spray can 10-20 cm from the surface and apply in continuous, even passes, first horizontally, then vertically. For best results, apply in two layers, ensuring the first layer is at least touch-dry before applying the second. Clean equipment or spills with ZINGASOLV.

Recommendations: ALUSPRAY is ideal for touch-ups on hot-dip galvanization, metallization, or existing ZINGA coatings, and for small area applications. Always refer to the ALUSPRAY safety data sheet for detailed health and safety information.

Frequently asked questions

• What is ZINGA ALUSPRAY used for? It’s an aluminium flake aerosol coating used for aesthetic finishing and protection, especially for touch-ups on galvanized or metallized surfaces and as a topcoat over ZINGA.
• Can I apply ALUSPRAY directly to rusty surfaces? No, surfaces must be thoroughly cleaned, degreased, and prepared (e.g., SA 2.5 or St 3) to ensure optimal adhesion and performance.
• How long does it take for ALUSPRAY to dry? It is dust-dry in 15-30 minutes, touch-dry in 30-45 minutes, and fully cured in 24 hours at 20°C for a 40 μm film.
• What is the recommended number of layers? For best results, apply ZINGA ALUSPRAY in two layers.
• What kind of finish does ALUSPRAY provide? It provides a nice aluminium aspect, comparable to RAL 9006 hot-dip galvanization.

Always ensure proper ventilation and wear appropriate personal protective equipment during application. Refer to the product’s safety data sheet for comprehensive safety information.