Tikkurila Temaclad SC 50 Semi-Gloss PU Anti-Corrosion Topcoat

Unmatched Durability and Aesthetic Appeal for Demanding Environments.

• Lasting Beauty: Experience exceptional color and gloss retention, keeping your surfaces looking their best longer, even in harsh conditions.
• Superior Protection: Formulates a dense, highly wear-resistant coating that shields against abrasion and impacts, extending the substrate’s lifespan.
• Effortless Maintenance: Benefit from a dirt-repellent, easy-to-clean surface that reduces maintenance efforts and costs over time.
• Versatile Application: Ideal for urban, marine, and industrial settings, providing robust anti-corrosion protection as a single-layer or topcoat.

Elevate your protective coatings with Tikkurila Temaclad SC 50, a premium two-component acrylic polyurethane paint engineered for unparalleled performance in challenging environments. This semi-gloss topcoat is formulated with advanced anti-corrosion pigments, providing a robust defense against degradation in urban, marine, and industrial settings.

Temaclad SC 50 delivers not only exceptional protection but also maintains a stunning finish. Its superior color and gloss retention properties ensure that painted surfaces remain vibrant and professional-looking for extended periods, significantly reducing the need for frequent recoating. The coating creates a dense, wear-resistant layer that withstands daily wear and tear, while its dirt-repellent properties make cleaning remarkably easy, thereby reducing long-term maintenance costs.

Whether you are working on new metal structures or maintaining existing surfaces, Temaclad SC 50 offers versatility. It performs excellently as a single-layer system on steel, aluminum, and galvanized substrates, and serves as an ideal topcoat within epoxy/polyurethane systems. Choose Temaclad SC 50 for a high-performance solution that combines aesthetic excellence with formidable, long-lasting protection.

Product information

• Mixing Ratio: Base: 9 parts by volume Temaclad SC 50; Hardener: 1 part by volume of 008 7615 (included in the kit).
• Pot Life (23°C): 4 hours.
• Recommended Film Thickness & Theoretical Coverage:
  • Wet 90 μm / Dry 50 μm: 11.0 m²/l (for old, hard paint layers or topcoats)
  • Wet 145 μm / Dry 80 μm: 6.9 m²/l (for new or untreated metal surfaces)
• Practical Coverage: Depends on application method, conditions, structure shape, and surface quality.
• Drying Times (50 μm dry film thickness approx.):
  • Dust-dry: 45 min (50°C), 1 h (35°C), 2 h (23°C), 3 h (10°C)
  • Touch-dry: 2 h (50°C), 3 h (35°C), 6 h (23°C), 9 h (10°C)
  • Recoatable min. after: 8 h (50°C), 12 h (35°C), 24 h (23°C), 30 h (10°C)
• Gloss: Semi-gloss (3/RT classification).
• Shades: Available according to RAL, NCS, SSG, BS, MONICOLOR NOVA, and SYMPHONY color charts. Temaspeed Premium tinting.
• Note: Drying and recoating times depend on film thickness, temperature, relative humidity, and ventilation.
• Work Protection: For industrial and professional use only. Observe warnings on the label and safety data sheet.

Usage

Surface Preparation:

• General: Wash oils, greases, salts, and dirt with a suitable detergent (ISO 12944-4).
• Steel Surfaces: Blast clean to Sa2½ (ISO 8501-1). If not possible, phosphating is recommended for cold-rolled steel.
• Galvanized Surfaces: Blast clean with mineral abrasives to SaS (SFS 5873) or alternatively sand. Metal roofs should be washed with Panssaripesu.
• Aluminum Surfaces: Blast-clean with non-metallic abrasives to SaS, or alternatively, sand or wash with Maalipesu.
• Primed Surfaces: Wash off contaminants, remove loose paint, repair damage, and observe recoating times.
• Old Alkyd and Sheet Surfaces (excluding PVDF): Mechanically clean rust to St2. Abrade hard, glossy surfaces. Wash with Panssaripesu.

System Components:

• Recommended Primers: Temaprime EE, Temacoat GF Primer. The paint is suitable for use without a primer (e.g., for metal sheet roofs).
• Recommended Topcoat: Temaclad SC 50.

Application Conditions:

• Surface must be clean and dry. Surface temperature must be above 0°C.
• The steel temperature must be at least 3°C above the dew point.
• Product temperature during mixing must be above 15°C.
• Not recommended for painting if the surface exceeds 40°C.
• Ensure good ventilation in enclosed spaces. Condensation can lead to a matt surface.

Mixing Components and Application:

• Mixing: Stir base and hardener separately, then together with a mechanical mixer.
• Application: By airless/conventional spray or brush. Can be diluted 0-10%.
• Sprayer: Nozzle 0.013″-0.019″ (0.33-0.48 mm), pressure 120-160 bar.
• Thinners / Cleaning: Thinner 1048, Thinner 1067.

Frequently asked questions

• What surfaces is Temaclad SC 50 suitable for?
  It is recommended as a single-layer coating for steel, aluminum, and galvanized surfaces, and as a topcoat in epoxy/polyurethane systems.
• Can Temaclad SC 50 be used in marine environments?
  Yes, it is suitable for use in urban, marine, and industrial environments due to its anti-corrosion properties and durability.
• Does Temaclad SC 50 always require a primer?
  No, it is suitable for direct application without a primer, for example, on metal sheet roofs. However, recommended primers such as Temaprime EE or Temacoat GF Primer can be used to enhance system performance.
• What is the pot life of the mixed paint?
  The pot life for the mixed product at 23°C is 4 hours, allowing ample time for application.

Disclaimer: The information provided is based on tests and experience. However, as the manufacturer cannot control the conditions of use, no liability can be accepted for any loss or damage arising from non-compliance with the instructions. This product is for industrial and professional use only.