Rust-Oleum FILLCOAT FIBRES waterproofing 1L

Don’t let leaks slow you down: Fix them instantly with Fillcoat Fibres Waterproofing!

Trusted Quality

Fillcoat Fibres Waterproofing is a product from Rust-Oleum, a leading brand in coatings and protection. You can trust Fillcoat Fibres to deliver long-lasting results for your waterproofing needs.

Stop Leaks Before They Start

Is your roof, gutter, or chimney stack showing signs of wear? Small cracks and holes can quickly turn into major leaks if left unaddressed. Fillcoat Fibres Waterproofing stops leaks instantly, sealing cracks up to 2mm wide.

All-Weather Application

Don’t wait for a sunny day to fix your leaks. Fillcoat Fibres can be applied in all weather conditions, except for snow, so you can tackle repairs whenever they’re needed.

More Than Just a Patch

Fillcoat Fibres isn’t just a temporary fix. It’s a tough, elastic paint that provides excellent adhesion to a variety of surfaces, including bitumen, metal, PVC, and more. This special formula offers superior UV resistance and water repellency, keeping your surfaces protected for years to come.

Fillcoat Fibres: The Easy-to-Use Solution

Here’s why Fillcoat Fibres is the perfect choice for your waterproofing project:

• Fast and Effective: Stops leaks and repairs cracks instantly.
• All-Weather Application: Can be used in rain or shine.
• Versatile: Adheres to a variety of surfaces.
• Durable: Long-lasting UV resistance and water repellency.

Technical Data

• Density: 1.01 g/cm³
• Gloss Level: Satin
• Solids Content: 52% weight / 43% volume
• Drying Times (20°C/50% RH):
  • Touch Dry: 4 hours
  • Recoat: 3-14 days with Fillcoat Fibres, 6 weeks with paint
  • Fully Cured: 3 weeks
• Recommended Wet Film Thickness: 1000 μm
• Recommended Dry Film Thickness: 430 μm
• Theoretical Coverage: 1 m²/L at 430 μm dry

For complete product information, refer to the Fillcoat Fibres Waterproofing Product Data Sheet.

Instructions for Use

1. Surface Preparation: Clean the area to be repaired, removing any dirt, debris, or loose material. For porous surfaces (concrete, stone, wood), apply a coat of Primer 44HS before using Fillcoat Fibres.
2. Stir Well: Ensure the product is thoroughly mixed before use.
3. Application: Apply Fillcoat Fibres using a brush. For cracks, apply the product crosswise to ensure proper coverage.
4. Cleaning: Clean up any spills or drips with Thinner 22 or white spirit.

Important Notes

• Do not apply Fillcoat Fibres to polystyrene insulation or new concrete (must be at least 2 years old).
• Not for use as a primer coat under Dac Hydro Alu.

Fillcoat Fibres Waterproofing: The fast, easy, and reliable solution for all your waterproofing needs!